Speed of Robot Play
#1
Posted 2018-November-10, 13:12
Is there a setting that controls this? Did I change the setting recently without knowing it? Is there a way to get back to things as they were?
#2
Posted 2018-November-10, 22:12
#3
Posted 2018-November-11, 16:00
If the robots play that fast during the upcoming NABC Robot Individual a lot of people are going to notice!
Thanks for your consideration.
#6
Posted 2018-November-15, 09:58
#7
Posted 2018-November-17, 21:41
barmar, on 2018-November-10, 22:12, said:
Programmed delays based on counting CPU cycles are always going to get shorter as computers run faster. Is it not possible to tie the delay to a real time clock instead?
#8
Posted 2018-November-19, 00:14
sacto123, on 2018-November-17, 21:41, said:
That's what we did. When the robot wins a trick, it now pauses for 1.5 seconds before quitting the trick and leading to the next trick.
#9
Posted 2018-November-19, 13:35
barmar, on 2018-November-19, 00:14, said:
How about a delay after each card is played. Not being able to see each card as it is played makes for a rather unpleasant experience.
#10
Posted 2018-November-19, 14:02
sacto123, on 2018-November-19, 13:35, said:
How about an option to turn over your played card, with the ability to see all played cards until you do so? This is a right under the laws of bridge, after all.
#11
Posted 2018-November-20, 09:20
sacto123, on 2018-November-19, 13:35, said:
All the cards played to the current trick remain visible until the winner leads to the next trick.
pescetom, on 2018-November-19, 14:02, said:
Until you play to the next trick you can click on the stack of quitted tricks to see the previous trick.
#12
Posted 2018-November-20, 11:24
barmar, on 2018-November-20, 09:20, said:
Is this something specific to Robot World, or to the Flash client?
Playing under Android at tables or in Free Tournaments, I don't see a stack of quitted tricks - the played cards just float off to the centre left under the board number, and I don't see where to click to view them before I play again.
#13
Posted 2018-November-21, 09:47