computer question can I get wireless connection?
#1
Posted 2012-March-17, 12:44
#4
Posted 2012-March-17, 14:44
sharon j, on 2012-March-17, 12:44, said:
It sounds to me like you have a cable modem, correct? If so, you can get a wireless router or, in most cases, ask the cable company to set up a wireless router in your home for you.
The way it works is this: currently, the internet feed goes from your cable coax, to your modem, to your computer. With a router, it will go: cable --> modem --> router. Then you can plug in your desktop to the router with an ethernet cable while SIMULTANEOUSLY also connecting to the router via wireless, no cables involved.
#5
Posted 2012-March-17, 14:52
#6
Posted 2012-March-17, 15:01
#9
Posted 2012-March-17, 20:02
As for tv, screw it. You aren't missing anything. -- Ken Berg
I have come to realise it is futile to expect or hope a regular club game will be run in accordance with the laws. -- Jillybean
#10
Posted 2012-March-18, 09:27
#11
Posted 2012-March-18, 12:58
Thanks all. BTW, I imagine many teens can do many things I cannot do. lol
#12
Posted 2012-March-18, 21:59
SSID: (some name)
Wireless Network Key: (a string of numbers)
If it has that, then you can connect using wireless. Ask your computer to detect all wireless signals within range. If one of them is (some name), then click connect and when prompted for a password type in (a string of numbers). That should do it.
#13
Posted 2012-March-19, 08:26
#14
Posted 2012-March-19, 09:15
sharon j, on 2012-March-19, 08:26, said:
No, I'm Tate. :-) Careful though --> what jdeegan was talking about was a ROUTER, not a modem. The modem translates signals from the cable into TCP/IP communication (basically, TCP/IP is the languages computers speak to each other over the internet). Routers then allow multiple computers to connect to that Internet connection.
You can't do wireless without that wireless router, unless your modem has built-in router capabilities.
Either way, your provider will be able to tell you what you have and whether you need a new installation of some sort.
#15
Posted 2012-March-19, 11:33
HighLow21, on 2012-March-17, 15:01, said:
Configuring routers so that you can access your wireless network is reasonably simple. Configuring the router so that the people outside your front door can't access your wireless network, and then all the computers on the network, wireless or not, is tricky.
As a result, "if you're not computer savvy, I do suggest having someone else do it..."
and then have them write down what is needed to add another device's "MAC Address" to the whitelist and what the encryption key/system is. If they can't do that - from just that description - they're not computer savvy enough (if they say "oh you wanted to run a whitelist? Okay..." and then go back in to set stuff up, that's okay, too). If they can, take that information to another of your "computer savvy" friends and have them look at it.
#16
Posted 2012-March-19, 14:20
I have since found out that my modem is a Actiontec M1000. There is a module upgrade (W1000) that will allow me to upgrade to wireless. This is what their website says about it:
"Add 802.11g wireless networking capabilities to your Qwest M1000 modem with this simple wireless plug-in module. All you have to do is plug the wireless module into the top of the M1000 DSL Modem. WPA (Wi-Fi Protected Access), WPA-PSK and Wired Equivalent Privacy (WEP) security features are all included for enhanced security.
•Compatible with Qwest M1000 DSL modems
•Provides your Qwest M1000 modem with 802.11g wireless connectivity
•Built-in WPA (Wi-Fi Protected Access), WPA-PSK and Wired Equivalent Privacy (WEP) security features for secure wireless connection
•Plug-and-play installation... no software or drivers required"
I also found an interest clip
http://computer.hows....com/router.htm
Even though these are router instuctions, would they not also apply to my modem after I have upgrade it?
Thanks everyone so much. You are really helping me out.
#17
Posted 2012-March-19, 15:55
#18
Posted 2012-March-21, 02:35